TRD Celica Parts

Toyota Celica, TRD High Performance Big Brake Kit, Front

PTR09-20001-01

TRD's big brake assembly comes complete with two-piece slotted rotors, 4-piston aluminum calipers, stainless steel, braided brake lines and high-performance brake pads. This advanced brake system decreases stopping distance, reduces system compliance without upsetting the stock front to rear brake torqe ratios, and enhances vehicle stability during aggressive driving and repeated or panic stops. The caliper is finished in red and features a white TRD logo.

Toyota Celica, TRD Performance Brakes Pads, Front

PTR09-20001-30

TRD’s high-performance, high-friction brake pads are made from aramid-and ceramic-strengthened compound, delivering an optimum combination of cold and hot friction, along with a high maximum operating temperature and low noise levels. Delivering increased braking performance while decreasing brake fade during repeated stops or extended downhill driving, TRD brake pads are engineered to minimize brake noise and enhance stopping power. 2Dr. Liftback and 3Dr. Liftback (4AT) and (5MT,6MT) 2000-2005

Toyota Celica, TRD Performance Brake Pads, Rear

PTR09-20010-15

TRD high-performance brake pads increase breaking performance and reduce fade during repeated stops or extended downhill driving. These brake pads are designed as a direct replacement. Base Model 2133, 3Dr. Liftback, 2000-2005

Toyota Celica, TRD High Performance Brake Kit, Pads

PTR09-34002-11

TRD's HP Brake Pads increase stopping performance, improve pad life, lengthen brake rotor life, reduce or eliminate noise, and offer superior high-temperature performance for heavy loads, stop-and-go driving, and moderate performance use. Some pads come with wear indicators and shims and are an exact replacement for Toyota original equipment pads. Pads that do not come with shims do not require shims. High performance brake shoes are NOT available. 2Dr. Liftback and 3Dr. Liftback (4AT) and (5MT,6MT) 2000-2005

Note: This is the replacement service pad for the TRD big brake kits applicable to several models.

Toyota Celica, TRD 18" Tire

DT001-21080-TO

Tire, Toyota Proxes 4, 225/40ZR18, 92W M+S. This tire is designed to be fit up to the TRD 18" x 7.5 inch x 42mm Celica wheel PTR18-21070 and or PTR18-21060 and or the multi-spoke TRD wheel PTR20-52082 and or PTR20-21094.

Toyota Celica, TRD 18" Black Wheel

PTR18-21060

Designed to provide owners the opportunity to upgrade factory wheels to the “big rim” look, the TRD 18-inch low-pressure cast aluminum alloy wheels1 feature a 5-spoke design with snap-in TRD logo center cap and matte finish black coating.

This 18" x 7.5" wheel has a 42 mm offset and a 5 on 100 mm bolt circle (P.C.D.) and a 54mm center bore. This wheel uses conical-seat hexagonal 19mm wrench-flat lug nuts. This TRD wheel is sold individually and includes one snap-in TRD center cap, five hexagonal conical-seat lug nuts and one 21 mm-to-19 mm adapter tool, all in the wheel box.

Toyota Celica, TRD 18" 5-Spoke Silver Wheel

PTR18-21070

Designed to provide owners the opportunity to upgrade factory wheels to the “big rim” look, the TRD 18-inch low-pressure cast aluminum alloy wheels1 feature a 5-spoke design with snap-in TRD logo center cap and a silver finish.

This 18" x 7.5" wheel has a 42 mm offset and a 5 on 100 mm bolt circle (P.C.D.) and a 54mm center bore. This wheel uses conical-seat hexagonal 19mm wrench-flat lugnuts. This TRD wheel is sold individually and includes one snap-in TRD center cap, five hexagonal conical-seat lug nuts and one 21 mm-to-19 mm adaptor tool, all in the wheel box.

Toyota Celica, TRD Wheel Lock Set

PTR27-34061

Combining style, security and durability, the TRD wheel lock set includes four conical seat 12mm puzzle-style wheel locks for use with 18-inch TRD wheels. Made from forged hardened steel, they’re triple nickel plated for a bright durable finish and each lock features a laser-etched TRD logo. A matching puzzle key is included with the lock set.

Toyota Celica, TRD Action Package Front Bumper

08164-20830

Primer-ed, ready to paint.

Toyota Celica, TRD Action Package Side Skirts

08156-20840

Primer-ed, ready to paint.

Toyota Celica, TRD Action Package Rear Wing

08150-20810

Primer-ed, ready to paint.

Toyota Celica, TRD Action Package Rear Bumper Valance

08158-20830

Primer-ed, ready to paint.

Toyota Celica, TRD Standard Length Exhaust Sport Muffler, GT

PTR08-20000-05

TRD Sport Mufflers increase horsepower, provide a deep, resonant engine sound. They are emissions-legal in all 50 states and meet aftermarket noise limit requirements. 3Dr. Liftback 2000-2005

Note: (GT) Exhaust without Action Package

Toyota Celica, TRD Extended Length Exhaust Sport Muffler, GTS

PTR08-20000-07

TRD Sport Mufflers increase horsepower, provide a deep, resonant engine sound. They are emissions-legal in all 50 states and meet aftermarket noise limit requirements. 2Dr. Liftback 2000-2004

Note: (GTS) Exhaust with Action Package due to extended tip used with rear valance.

Toyota Celica, TRD Stainless Steel Headers

17100-ZE200

When it comes to headers, they are one of the easiest bolt-on accessories you can use to improve an engine’s performance. Why? Because it’s all about improving breathing efficiency and headers make it easier for the engine to push exhaust gases out of the cylinders. 2000-2005 (GTS Only)

Toyota Celica, TRD Suspension Brace Strut Tower, Rear

PTR04-20901-01

TRD Strut Tower Braces increase the chassis rigidity reducing flex and handling imprecision in aggressive cornering or rough-road driving. Constructed of lightweight, high-strength steel tubing.

Toyota Celica, TRD Suspension Sway Bar, Front and Rear

PTR06-20002-01

Engineered by TRD to enhance handling characteristics, the sway bar provides a flatter, more stable cornering stance. Constructed of high-quality spring steel and featuring a lightweight, tubular design, the sway bar’s durable gloss red powder cost finish resists corrosion and protects against road damage, while providing a striking visual enhancement to the vehicle.

Toyota Celica, TRD Suspension Lowering Springs, Set

PTR04-20940-08

TRD Lowering Springs typically lower the vehicle from 1 to 1.5 inches, front and rear, lowering the center of gravity of quicker turn-in, enhanced steering response and cornering. 1994-1996

Toyota Celica, TRD Suspension Lowering Springs, Set

PTR07-20000

TRD Lowering Springs typically lower the vehicle from 1 to 1.5 inches, front and rear, lowering the center of gravity of quicker turn-in, enhanced steering reponse and cornering. 2000-2005

Toyota Celica, TRD, Shock Set(4)

PTR13-20002-00

TRD High-Performance Struts:--The high-performance TRD struts incorporate rising-rate shock valves and a nitrogen-pressurized mono-tube. For the aggressive driver this means reduced body roll and improved cornering stability. They will also outlast conventional struts 3 to 4 times over.

Toyota Celica, TRD Spring & Shock Set(4) Combo

PTR01-20000-25

TRD High-Performance Struts: The high-performance TRD struts incorporate rising-rate shock valves and a nitrogen-pressurized mono-tube. For the aggressive driver this means reduced body roll and improved cornering stability. They will also outlast conventional struts 3 to 4 times over. TRD Lowering Springs: These TRD progressive-rate springs reduce a vehicle`s ride height by about one inch, lowering the center of gravity for improved handling and providing a more aggressive look without compromising the suspension`s function or altering ride quality.

Toyota Celica, TRD Air Filters, 3.0L, V6

PTR05-06990-01

Pre-oiled and ready to install. Washable and reusable. Exact drop-in replacement for stock air filter. 1994-1999

Toyota Celica, TRD Air Filters

PTR05-20000-07

Pre-oiled and ready to install. Washable and reusable. Exact drop-in replacement for stock air filter. 2000-2005

Toyota Celica, TRD Oil Filters

PTR43-00080

This samll part of the vehicle's lubrication sytem plays a vital role in protecting the engine from premature wear. TRD high- performance oil filters incorporate state of the art design and materials offering superior protection. Both the spin-on and element filters use 3 plies of 100% synthetic glass/polyester blend filtration media that's 98% efficient at 20 microns - that's smaller than pollen. 3Dr. Liftback - 1988-1989

Toyota Celica, TRD Oil Filters

PTR43-33010

TRD High Performance Oil Filters incorporate state-of-the-art design and materials offering superior protection. The filter uses 3 plies of 100% synthetic glass/polyester blend filtration meida that 98% efficient at 20 microns - thats smaller than pollen. 2Dr. Liftback and 3Dr. Liftback - 1990-2005

Toyota Celica, TRD Filter Cleaning Kit

PTR43-00088

Created specifically for vehicles already equipped with a TRD performance air filter, the cleaning kit includes everything owners need to help ensure the superior protection and performance of the air filter.

Toyota Celica, TRD Metal Cylinder Head Gasket

PTR04-17910-01

TRD metal head gaskets are a direct replacement for the factory head gasket and are better for higher cylinder pressure and heat.

Toyota Celica, TRD Clutch Assemby

PTR15-20000-25

Kit features a high-capacity TRD pressure plate. Stiffer diaphragm springs and load straps increase clamping force approximately 25%, with an increase in pedal pressure of just 10%

Toyota Celica, TRD Light Weight Flywheel

PTR05-TF210

TRD Japan's lightweight flywheel lets you have factory-quality stability, while allowing you to rev faster and freer than you've ever been able to before! Flywheel is 10 pounds, down from the stock 16 pounds. (GT-Only)

Toyota Celica, TRD (RPS) Segmented Flywheel, GT

BF225491

RPS Segmented flywheels offer the benefit of having bolt in friction plates that can be replaced by the user. 9.5Lbs. 2000-Up 1ZZ (GT)

Toyota Celica, TRD (RPS) Segmented Flywheel, GTS

BF225492

RPS Segmented flywheels offer the benefit of having bolt in friction plates that can be replaced by the user. 9Lbs. 2000-Up (GTS)

Toyota Celica, TRD Quickshifter

PTR04-20000-10

TRD Quickshifters deliver, faster, positive shifting. Repositioned pivot points provide up to a 20% shorter shift throw. 2000-2005

Toyota Celica, TRD Quickshifter

PTR04-20940-04

TRD Quickshifters deliver, faster, positive shifting. Repositioned pivot points provide up to a 20% shorter shift throw. 1994-1997

Toyota Celica, TRD Large Leather Shift Knob, Manual Transmission

PTR04-00000-05

This traditional TRD shift knob features a hand-laced black leather-wrapping, along with a red TRD logo along the side for added appeal. Provides the 5-speed manual shifter with an edge in appearance, while also enhancing the up/down shifting experience.

Toyota Celica, TRD Shift Knob Ball, Manual Transmission

PTR04-00000-06

This classic ball-type TRD shift knob features a hand-laced black leather-wrapping, with a carbon fiber insert on top that includes the TRD logo in white. It enhances the up/down shifting experience, and the appearance, of 5-speed manual transmission vehicles.

Toyota Celica, TRD Shift Knob, Billet Aluminum

PTR04-17001-01

TRD Shift Knobs give your manual shift Toyota an edge in both looks and shifting feel. Installation is easy: a self tapping sleeve assures a tight screw-on fit to any M12 x .25 metric Toyota shift lever.

Toyota Celica, TRD Oil Cap, Japan

PTR04-12108-02

Manufactured from forged, highly polished billet aluminum, the TRD oil cap features the TRD logo and chevron to dress up the engine compartment with a high-tech, race-ready appearance. It’s finished with a high-luster coating to maintain appearance for years to come. 2Dr. Liftback and 3Dr. Liftback - 2000-2005

Toyota Celica, TRD Forged Aluminum Oil Cap, Screw-on Style

PTR35-00070

Manufactured from forged, highly polished billet aluminum, the TRD oil cap features a RED ON BLACK TRD logo to customize the engine compartment with a high-tech, race-ready appearance. It’s finished with a high-luster coating to maintain appearance for years to come. 2Dr. Liftback anc 3Dr. Liftback - 1995-2005

Toyota Celica, TRD 18.5psi N-Type Radiator Cap

PTR04-00000-03

The addition of a TRD high-pressure radiator cap helps the vehicle perform better under pressure in high-rpm or high-load conditions because it’s designed to release at higher cooling system pressures than stock radiator caps—providing increased pressure and higher boiling point.